top of page
Bull Shark Mount Replica
The Bull Shark is one of the most powerful inshore sharks in Florida waters and a legitimate offshore trophy for anglers across the Gulf and Atlantic coasts. Greg Cassell hand paints every bull shark mount replica to order. See the full gallery below and order yours today.
90-Inch Bull Shark Full Mount, Left-Facing Profile
This full left-facing lateral profile of a 90-inch bull shark full mount replica shows the grey dorsal surface, white ventral counter-shading, and the characteristic heavy-set build of Carcharhinus leucas, all reproduced from a first-generation cast mold. The dark-tipped first dorsal fin, positioned well forward on the body, and the heterocercal caudal fin are anatomical markers specific to this species, rendered here at correct proportions across the full length. Bull shark full mount replicas at Florida Fish Mounts are produced in commission sizes to match the customer's catch.
Bull Shark Full Mount Replica, Right-Facing Profile
A right-facing full body profile of a bull shark full mount replica shows the uniformly grey dorsal coloration and the counter-shading gradient to the lighter ventral surface across the full length of the fish. The fiberglass construction holds color, surface detail, and fin geometry without the fading, warping, or deterioration that occur in skin-mounted alternatives over time. The automotive-grade airbrush finish and UV-resistant urethane clear coat are sealed into the surface for permanent archival display.
Bull Shark Mount Replica, Angled Front View with Open Jaw
An angled front view of a bull shark full mount replica shows the open jaw with multiple rows of serrated triangular teeth and the full gape of the oral cavity. The upper jaw teeth are broad and serrated; the lower jaw dentition is narrower and more upright, and both sets are cast separately and installed by hand to produce dimensional tooth geometry accurate to the actual species dentition. The broad, blunt snout and forward-set pectoral fins visible in this frame are the characteristic anatomical form specific to this species.
Bull Shark Full Mount, Overhead Front View with Open Jaw
From directly above and in front, this overhead angle of a bull shark full mount replica shows the full gape of the open jaw, both rows of serrated triangular teeth, and the white ventral surface of the lower jaw and chest. No fish is required to commission a bull shark replica at Florida Fish Mounts. The customer submits a catch photo and Greg Cassell produces the mount from that reference, matching coloration, scarring, and any fin condition specific to that fish.
Bull Shark Full Mount, Ventral Overhead View
Looking down at the ventral surface of a bull shark full mount replica, this overhead view shows the white counter-shaded belly, the five gill slits on each side of the throat, and the broad-tipped pectoral fins in a natural swimming attitude. The counter-shading of Carcharhinus leucas, white on the ventral surface transitioning through graduated grey to dark grey on the dorsal, is reproduced by Greg Cassell using multi-stage automotive-grade airbrush pigments built over a translucent pearl base coat. This angle is particularly relevant for buyers considering the 360° suspension mount, where the fully painted ventral surface is visible from below.
Bull Shark Mount Replica, Open Jaw and Tooth Detail Close-Up
The open jaw of this bull shark full mount replica, shown in close-up, reveals the serrated triangular upper jaw teeth and the narrower lower jaw dentition at full detail against the painted oral cavity. The teeth at Florida Fish Mounts are cast separately from the fiberglass body and installed by hand, producing dimensional tooth geometry that paint alone cannot achieve. Artist Greg Cassell finishes the oral cavity, the tooth bases, and the surrounding jaw anatomy with multi-stage airbrush pigments matched to the species.
Bull Shark Full Mount, Elevated Left-Profile View
Photographed from a slightly elevated angle, this full left-facing lateral profile of a bull shark full mount replica shows the dark grey dorsal surface and the clean alignment of the first and second dorsal fins along the body. Artist Greg Cassell applies the dorsal coloration in multi-stage automotive-grade airbrush layers, building from a translucent pearl base coat through grey mid-tones to the final dark dorsal finish. The UV-resistant urethane clear coat applied as a final stage seals every stage of that process, holding color without fading or surface degradation over time.
Bull Shark Wall Mount Replica, Right Lateral Profile
Captured from a level lateral angle, this right-facing profile of a bull shark wall mount replica shows the blue-grey dorsal coloration and the clean counter-shading transition to the white ventral surface across the full length of the fish. The fiberglass construction and automotive-grade finish eliminate the odor, surface deterioration, and color loss that occur in skin-mounted alternatives over time. A final UV-resistant urethane clear coat seals every surface, making this replica appropriate for permanent display in any indoor or commercial setting.
Bull Shark Mount Replica, Below-Lateral Profile View
Seen from below the lateral axis, this view of a bull shark full mount replica exposes the full counter-shading gradient of Carcharhinus leucas: dark grey on the dorsal surface, lightening across the flanks, and fully white on the ventral. The dark-tipped first dorsal and caudal fins stand against the lighter flank coloration in this view, showing the tonal contrast that defines the species' natural color pattern. The smooth paint transitions visible in this image are the result of Greg Cassell's multi-stage automotive-grade airbrush process.
Bull Shark Full Mount, Three-Quarter Angled View
Greg Cassell's multi-stage airbrush finish is visible across the full dorsal surface in this three-quarter angled view of a bull shark full mount replica, showing the grey-to-dark tonal build and the iridescent quality produced by the pearl base coat layer. Every stage of the finish is applied by hand using automotive-grade pigments, from the translucent pearl base coat through graduated mid-tones to the final color layer, creating the tonal depth visible at this angle. The UV-resistant urethane clear coat applied as a final stage seals the entire body and preserves this level of finish detail indefinitely.
Bull Shark Mount Replica, Head and Eye Detail Close-Up
Head and eye detail on this bull shark full mount replica shows the hand-painted glass eye, the blunt rounded snout profile, and the open jaw with serrated triangular teeth visible in both upper and lower rows. The glass eyes at Florida Fish Mounts are hand-painted to match the species-specific iris coloration and installed individually, a detail visible at this scale. Full wall mounts start at $17 per inch and 360° suspension mounts start at $20 per inch.
Bull Shark Wall Mount Replica, Full Body Three-Quarter View
The full body three-quarter view of this bull shark wall mount replica shows the complete form from blunt snout to heterocercal caudal fin, the grey dorsal surface, and the counter-shading transition across the flanks and ventral surface. No fish is required to place a commission at Florida Fish Mounts. The customer submits a catch photo and Greg Cassell produces the complete replica from that reference, with full wall mounts from $17 per inch and 360° suspension mounts from $20 per inch.
Simple and Transparent Pricing
$160 Minimum per mount. Contact us for pricing on mounts 150+ Inches, driftwood wall mounts, and pedestal mounts
Bull Shark Mount Lengths Range from 26 inches to 124 inches
Half Mount
-
Up to 64": $10 / inch
-
65" to 90": $11 / inch
-
91" to 120": $12 / inch
-
121'' to 149'': $13 / inch
Full Mount
-
Up to 64": $17 / inch
-
65" to 90": $18 / inch
-
91" to 120": $19 / inch
-
121'' to 149'': $20 / inch
360° 3d Mount
-
Up to 64": $20 / inch
-
65" to 90": $21 / inch
-
91" to 120": $22 / inch
-
121'' to 149'': $23 / inch
Ready to Mount Your Bull Shark?
All mounts handpainted to order by Greg Cassell.
Minimum order $160.
Capture your trophy catch forever with a handcrafted, museum-quality mount by Greg Cassell. Join the anglers who have rated us five stars for craftsmanship and service.
5-Star Floridian Craftsmanship
bottom of page