top of page
Cobia Fish Mount Replica
The Cobia, known to anglers as ling, is one of Florida’s most prized nearshore game fish and one of Florida Fish Mounts’ most popular saltwater replicas. See the full gallery below and order yours today.
Torpedo-Body Silhouette in Right-Facing Full Profile | 35-Inch Cobia Full Mount Replica
A 35-inch fiberglass cobia double-sided full mount replica by artist Greg Cassell, shown in right-facing full body profile. The elongated, torpedo-shaped body and pale lateral stripe running the full length are the primary identification marks of Rachycentron canadum, rendered in automotive-grade airbrush pigments over a first-generation mold cast from a real cobia. This cobia wall mount is available in half mount and full mount formats; Greg Cassell photo matches the coloration, scar placement, and fin condition to the angler's submitted catch photo for either format. No fish is required for the commission.
Depressed Head Profile and Protruding Lower Jaw | 35-Inch Cobia Full Mount Replica
A close-up of the head on a 35-inch fiberglass cobia full mount replica by artist Greg Cassell, showing the species-defining flattened, depressed head profile and protruding lower jaw of Rachycentron canadum. Cobia are commonly mistaken for sharks or remoras at a distance because of this same elongated, flat-headed silhouette, and the replica captures that anatomical accuracy from a first-generation mold cast from a real fish. The orange-brown glass eye is hand-painted to match the iris of the specific fish from the angler's submitted catch photo, and the mouth and teeth are hand-sculpted to match the open-jaw position shown here.
Soft Dorsal Fin and Anal Fin Over the Caudal Peduncle | 35-Inch Cobia Full Mount Replica
A view of the rear body section on a 35-inch fiberglass cobia double-sided full mount replica by artist Greg Cassell, showing the long soft dorsal fin, anal fin, and caudal peduncle in golden-olive tones. The dark dorsal band transitions to the silver-blue lower flank in this section, rendered in multi-stage automotive-grade airbrush pigments over a first-generation fiberglass mold. Double-sided full mount construction means every surface visible in this image is fully painted, unlike a single-sided half mount where the reverse side stays raw fiberglass. Artist Greg Cassell builds color through translucent pearl base coats before the final UV-resistant urethane clear coat layer.
Lunate Caudal Fin in Olive-Bronze Tones | 35-Inch Cobia Full Mount Replica
A close-up of the caudal fin on a 35-inch fiberglass cobia full mount replica by artist Greg Cassell. The moderately lunate, slightly crescent-shaped tail is a species-defining trait of Rachycentron canadum, and each fin ray is individually painted in olive-bronze automotive-grade pigments. Cobia carry a naturally oily skin and thick slime coat, and the tail is among the first surfaces to show grease bleed and color loss when a traditional skin mount ages. The fiberglass replica holds its color and surface detail at this level of fin-ray definition indefinitely, sealed under a UV-resistant urethane clear coat that requires no refinishing.
Copper-Brown Ling in Left-Facing Full Profile | 21-Inch Cobia Half Mount Replica
A 21-inch fiberglass cobia single-sided half mount replica by artist Greg Cassell, shown in left-facing full body profile. Many saltwater anglers along the Gulf and Atlantic coasts know this fish as ling, and the bold white lateral stripe bordered by deep copper-brown dorsal coloration is one of the most recognizable field marks for identifying cobia at the boat. Greg Cassell matches the stripe contrast, coloration, and fin condition to the angler's submitted catch photo, so no fish is required for the commission. Single-sided cobia half mount replicas start at $10 per inch with a $160 minimum.
Hand-Painted Yellow-Gold Glass Eye | 21-Inch Cobia Half Mount Replica
A close-up of the head on a 21-inch fiberglass cobia half mount replica by artist Greg Cassell, showing the species' characteristic flattened, depressed head profile, protruding lower jaw, and a yellow-gold glass eye. Greg Cassell hand-paints every glass eye to match the exact iris tone in the angler's submitted catch photo, which is why this 21-inch specimen carries a yellow-gold eye rather than the orange-brown seen on the studio's 35-inch full mount. The open mouth and hand-sculpted teeth visible here capture the jaw position of this individual fish at the time of catch. Each facial detail, including the coloration around the eye socket and the chin markings, is airbrushed in multi-stage automotive-grade pigments.
White Lateral Stripe Running to the Caudal Peduncle | 21-Inch Cobia Half Mount Replica
A view of the rear body section on a 21-inch fiberglass cobia half mount replica by artist Greg Cassell, showing the bold white lateral stripe running through the copper-brown dorsal area toward the caudal peduncle. The long soft dorsal fin and ventral fin near the tail end are visible here, each fin ray individually painted in automotive-grade pigments over a first-generation fiberglass mold. Cobia's naturally oily skin and thick slime coat make the body stripe and tail region among the first areas to show grease bleed on a traditional skin mount over time. This cobia wall mount replica avoids that failure entirely, holding color and surface detail under the UV-resistant urethane clear coat with no refinishing required. Cobia half mount replicas start at $10 per inch and full mount replicas start at $17 per inch, both with a $160 minimum.
Scale Texture and Lateral Band Under Close Magnification | 21-Inch Cobia Half Mount Replica
A tight close-up of the 21-inch cobia half mount replica showing the fine scale texture and the pale white lateral band separating the dark copper-brown dorsal surface from the lighter lower flank. Artist Greg Cassell renders the individual scale pattern and the precise stripe edge in multi-stage automotive-grade airbrush pigments applied over a first-generation fiberglass mold cast from a real cobia. First-generation molds capture surface texture at this level of detail directly from the fish, a fidelity that secondhand production molds cannot replicate. The scale texture and stripe boundary visible here are matched to the specific pattern of the individual fish in the angler's submitted catch photo.
Dark Brown Caudal Fin with Black-Tipped Margins | 21-Inch Cobia Half Mount Replica
A close-up of the caudal fin on a 21-inch fiberglass cobia half mount replica by artist Greg Cassell, showing the rich dark brown interior of the fin transitioning to black-tipped margins. Each fin ray is individually painted in multi-stage automotive-grade airbrush pigments and sealed under a UV-resistant urethane clear coat that holds the high-gloss surface finish. In life, cobia's oily skin makes the tail one of the first surfaces to show grease bleed and discoloration on a traditional skin mount. The fiberglass replica maintains color fidelity at this level of fin-ray detail without the odor or structural decline of a skin mount alternative.
Diagonal Swimming-Down Display Angle | 21-Inch Cobia Half Mount Replica
A 21-inch fiberglass cobia half mount replica photographed at a diagonal downward angle, showing the full dorsal surface and the bold lateral stripe of a fish known to many Gulf Coast anglers as a lemonfish. This mounting angle is a common display choice for catch-and-release commissions where the angler wants the replica to suggest active swimming motion on the wall rather than a flat horizontal profile. Greg Cassell works from the angler's submitted catch photo to match the coloration, fin condition, and individual markings of that specific fish before it was released. The finished mount ships nationwide via UPS Ground in approximately 9 to 12 weeks.
Raw Fiberglass Back and Painted Display Face Compared | 21-Inch Cobia Half Mount Replica
Front and back views of a 21-inch fiberglass cobia half mount replica, showing the finished painted display face on the bottom and the raw unpainted fiberglass reverse side on the top. The back shows the adjustable hanging wire hardware that allows precise wall positioning, and the clean single-sided fiberglass shell construction that serves as the reverse of every Florida Fish Mounts half mount. Unlike a traditional skin mount, this reverse side will never warp, shrink, develop odor, or require restoration as the mount ages. The adjustable wire allows the replica to hang flush on any interior wall without the constraints of a fixed bracket.
Silver-Olive Color Phase in Left-Facing Full Profile | 21-Inch Cobia Half Mount Replica
A 21-inch fiberglass cobia half mount replica in a silver-olive color phase, shown in left-facing full body profile and presenting a distinctly cooler coloration than the copper-brown specimen shown in the earlier full-body images. Cobia coloration varies by individual fish, season, and conditions at time of catch, and this silver-olive phase represents exactly that natural variation. Artist Greg Cassell photo matches every commission to the angler's submitted catch photo, so the cooler silver-green dorsal, lighter lateral area, and olive-tinted fins here are specific to that angler's catch and not a standard production color. The lateral stripe is present in both specimens but reads differently against the silver-olive base than it does against the warm copper-brown phase.
Simple and Transparent Pricing
$160 Minimum per mount. Contact us for pricing on mounts 150+ Inches, driftwood wall mounts, and pedestal mounts
Cobia Fish Mount Lengths Range from 21 inches to 70 inches
Half Mount
-
Up to 64": $10 / inch
-
65" to 90": $11 / inch
-
91" to 120": $12 / inch
-
121'' to 149'': $13 / inch
Full Mount
-
Up to 64": $17 / inch
-
65" to 90": $18 / inch
-
91" to 120": $19 / inch
-
121'' to 149'': $20 / inch
360° 3d Mount
-
Up to 64": $20 / inch
-
65" to 90": $21 / inch
-
91" to 120": $22 / inch
-
121'' to 149'': $23 / inch
Ready to Mount Your Cobia?
All mounts handpainted to order by Greg Cassell.
Minimum order $160.
Capture your trophy catch forever with a handcrafted, museum-quality mount by Greg Cassell. Join the anglers who have rated us five stars for craftsmanship and service.
5-Star Floridian Craftsmanship
bottom of page