top of page
Hogfish Fish Mount Replica
The Hogfish, often called hog snapper is one of Florida's most sought-after reef fish and one of Florida Fish Mounts' most requested saltwater replicas. See the full gallery below and order yours today.
Bronze Phase Full Body Profile | 20" Hogfish Full Mount Replica
A 20-inch fiberglass hogfish, also called hog snapper by many reef anglers, full mount replica painted by artist Greg Cassell in a bronze-brown color phase. Florida Fish Mounts casts every hogfish blank from a first-generation mold of the actual fish, then hand sculpts the mouth and airbrushes the coloration in multi-stage automotive-grade paint. The tall anterior dorsal spines that give this species its "hog" bristle are rendered in full detail. Half mount hogfish replicas start at $10 per inch and full mounts at $17 per inch.
Rose Phase Catch Comparison | 20" Hogfish Full Mount Replica
A 20-inch hogfish catch, shown in a rose-pink color phase, compared alongside the finished fiberglass full mount replica painted by artist Greg Cassell. This is the process in a single image: submit your photo before you clean your catch, and the replica is painted to match what came off the reef. No fish is required for the commission itself, only a clear reference photo of the catch. Hogfish are most often taken by spearfishing on reef structure, though hook-and-line catches like this one are matched the same way.
Right Facing Body Profile | 20" Hogfish Full Mount Replica
A right-facing profile of a 20-inch fiberglass hog snapper, more precisely known as hogfish (Lachnolaimus maximus), full mount replica painted by artist Greg Cassell. Despite the common nickname, hogfish belongs to the wrasse family, not the snapper family, a distinction anglers frequently ask about. The bronze-brown flank coloration and thick, protruding lips are hand painted in automotive-grade pigment. Fiberglass construction means this replica will not shrink, rot, or lose color the way an organic skin mount eventually does.
Full Mount Back View Steel Bracket | 20" Hogfish Wall Mount Replica
Back view of a 20-inch fiberglass hogfish full mount replica showing the steel wall bracket used to hang the piece. Unlike a skin mount, which can warp, crack, or develop odor at the seams over time, this archival fiberglass construction holds its form indefinitely. Full mount hogfish replicas start at $17 per inch with a $160 minimum. This hogfish wall mount is built to hang flush and level without additional hardware.
Barred Phase Half Mount Back | 20" Hogfish Half Mount Replica
Front and back views of a 20-inch fiberglass hogfish half mount replica in a barred red color phase, painted by artist Greg Cassell. The dorsal spines, red-ringed eye, and reddish-tan vertical banding are anatomically specific to this individual specimen rather than a stock color template. The reverse side shows the clean single-sided fiberglass shell construction, with no organic material to warp or degrade. Hogfish color phases vary significantly by individual fish, and Florida Fish Mounts matches the phase shown in the submitted catch photo.
Barred Phase Catch Comparison | 20" Hogfish Half Mount Replica
A hogfish catch in mottled brown coloration is shown above the finished 20-inch fiberglass half mount replica, painted in a red barred phase to match by artist Greg Cassell. Submit your photo before you clean your catch, and the mount is built from that reference regardless of whether the fish is kept for the table or released. The single-sided half mount construction keeps the piece lightweight for wall display. No fish is required to place the order itself.
Hand Sculpted Teeth Closeup | 20" Hogfish Half Mount Replica
A close-up of the head and open mouth on a 20-inch fiberglass hogfish half mount replica, painted by artist Greg Cassell. The mouth and prominent canine teeth are hand sculpted rather than cast as a flat surface, since hogfish use these teeth to crush shellfish and crustaceans pulled from the reef. The eye is hand painted glass, matched to the reddish iris seen in this specimen. This level of head detail is what separates a fine art commission from a production replica.
Yellow Pectoral Fin Detail | 20" Hogfish Half Mount Replica
A close-up of the mid-body and yellow pectoral fin on a 20-inch fiberglass hogfish half mount replica, painted by artist Greg Cassell in a barred red phase. The scale texture visible here comes directly from the first-generation mold cast of the actual fish, not a generic blank. The pectoral fin coloration and reddish body bars are airbrushed in multiple stages to build depth rather than a flat single coat. This hogfish wall mount holds that detail without fading over years of display.
Diamond Scale Tail Detail | 20" Hogfish Half Mount Replica
A close-up of the tail section on a 20-inch fiberglass hogfish half mount replica, showing the diamond-shaped scale pattern where the body narrows into the caudal fin. On a skin mount, this area is one of the first to crack or lose color as the material dries out over time. On this archival fiberglass replica, the fin ray definition and coloration hold without deterioration. The finish is sealed with a UV-resistant clear coat as the final step.
Barred Phase Full Body View | 20" Hogfish Half Mount Replica
A full body view of a 20-inch fiberglass hog snapper, more accurately called hogfish, half mount replica in a barred red color phase, painted by artist Greg Cassell. The name hogfish comes from the species' elongated, pig-like snout, used to root through sand and rubble for crustaceans and mollusks on reef structure. Half mount hogfish replicas start at $10 per inch with a $160 minimum. This hogfish wall mount is built to hang flush against the wall using an adjustable rubber-coated wire.
Orange Phase Half Mount Profile | 21" Hogfish Half Mount Replica
A 21-inch fiberglass hogfish half mount replica in a solid orange color phase with a black band across the tail, painted by artist Greg Cassell to match the individual specimen's coloration rather than a stock template. Spearfishing and free-diving are the dominant capture methods for hogfish on reef structure, and Florida Fish Mounts builds the replica from a submitted dive photo the same way it would from a rod-and-reel catch. This color phase differs noticeably from the barred red phase shown on the 20-inch half mount pieces in this same gallery. The tall dorsal spines are cast from the same first-generation mold process used across every size.
Rose Tan Catch Comparison | 24" Hogfish Full Mount Replica
A 24-inch hogfish catch, shown in a rose-pink coloration, compared alongside the finished fiberglass full mount replica painted by artist Greg Cassell in a matching rose-tan phase. Submit your photo before you clean your catch, whether the fish is headed for the table or released back to the reef, and the replica is built from that single reference. This is a larger specimen than the 20-inch pieces shown earlier in the gallery, and the size difference is visible in the fuller body depth. No fish is required once the photo is submitted.
Snout And Jaw Closeup | 24" Hogfish Full Mount Replica
A close-up of the head on a 24-inch fiberglass hogfish full mount replica, painted by artist Greg Cassell. The hogfish gets its name from this elongated, pig-like snout, which the species uses to root through sand and reef rubble for crustaceans and mollusks. The canine teeth visible here are hand sculpted, since they are what the fish relies on to crush shellfish. The reddish-tan head coloration transitions cleanly into the pale lower jaw in a multi-stage airbrush finish.
Rose Tan Shoulder Detail | 24" Hogfish Full Mount Replica
A close-up of the shoulder and yellow-edged pectoral fin on a 24-inch fiberglass hogfish full mount replica, painted by artist Greg Cassell in a rose-tan color phase. The scale texture across the flank is built in multiple translucent pearl base coats before the final automotive-grade color layer is applied. This level of shoulder and fin detail is achieved because the blank is cast from a first-generation mold, not a secondhand copy of another mount. The finish is sealed under a UV-resistant clear coat as the last step.
Rose Tan Tail Detail | 24" Hogfish Full Mount Replica
A close-up of the tail on a 24-inch fiberglass hogfish full mount replica, painted by artist Greg Cassell in a rose-tan color phase. On an organic skin mount, the fin rays in this area are prone to curling, cracking, and fading well before the rest of the piece shows wear. On this fiberglass replica, the same detail is molded permanently into the shell and holds its color under the archival automotive-grade finish. No shrinkage, rot, or odor develops over time.
Rose Tan Full Body Profile | 24" Hogfish Full Mount Replica
A full body left-facing profile of a 24-inch fiberglass hogfish full mount replica, painted by artist Greg Cassell in a rose-tan color phase. This hogfish wall mount shows the complete dorsal spine row, the elongated snout, and the fin coloration in a single view, built from the same first-generation mold and multi-stage airbrush process used throughout the gallery. Full mount hogfish replicas start at $17 per inch with a $160 minimum. The piece is made 100% in the United States, mostly in Florida.
Simple and Transparent Pricing
$160 Minimum per mount. Contact us for pricing on mounts 150+ Inches, driftwood wall mounts, and pedestal mounts
Hogfish Mount Replica Lengths Range from 16 inches to 36 inches
Half Mount
-
Up to 64": $10 / inch
-
65" to 90": $11 / inch
-
91" to 120": $12 / inch
-
121'' to 149'': $13 / inch
Full Mount
-
Up to 64": $17 / inch
-
65" to 90": $18 / inch
-
91" to 120": $19 / inch
-
121'' to 149'': $20 / inch
360° 3d Mount
-
Up to 64": $20 / inch
-
65" to 90": $21 / inch
-
91" to 120": $22 / inch
-
121'' to 149'': $23 / inch
Ready to Mount Your Hogfish?
All mounts handpainted to order by Greg Cassell.
Minimum order $160.
Capture your trophy catch forever with a handcrafted, museum-quality mount by Greg Cassell. Join the anglers who have rated us five stars for craftsmanship and service.
5-Star Floridian Craftsmanship
bottom of page