top of page
Northern Pike Fish Mount Replica
The Northern Pike, known to serious anglers as the Water Wolf and jackfish, is one of freshwater fishing's most aggressive apex predators. See Florida Fish Mounts gallery below and order yours today.
47-Inch Northern Pike Double-Sided Full Mount Replica, Right-Facing Profile
A right-facing full body profile of a 47-inch northern pike double-sided full mount replica shows the torpedo body, the yellow-gold bean spot patterning on the dark olive-green flanks, the duck-bill snout, and the open jaw. Northern pike skin mounts are uniquely prone to grease bleed: the natural oils in pike skin migrate through the preserved hide over time and discolor the paint finish in a way that cannot be reversed. This photo matched fiberglass wall mount eliminates grease bleed entirely, producing a permanent archival finish that a skin mount on Esox lucius cannot match.
Northern Pike Wall Mount Replica, Head Close-Up, Hand-Sculpted Teeth and Duck-Bill Snout
A close-up of the head on a northern pike wall mount replica shows the duck-bill flattened snout, the open jaw with multiple rows of hand-sculpted canine teeth, and the yellow-gold bean spot patterning across the face and cheek. The teeth on every Florida Fish Mounts pike replica are hand-sculpted and individually installed, not cast as a flat tray, producing the dimensional dentition geometry of Esox lucius that paint alone cannot replicate. The amber-green iris glass eye and the mottled olive-green cranial patterning are painted by Greg Cassell in a multi-stage automotive-grade airbrush process.
Northern Pike Replica, Open Gill and Operculum Detail, Handcrafted Gill Filaments
A ventral-angle view of a northern pike fish mount replica shows the open gill cover with handcrafted red gill filaments, the pelvic fin, and the olive-gold bean spot flank coloration. The gill filaments on this replica are hand-built and painted individually, not molded as a flat surface, producing the layered anatomical depth of Esox lucius that standard production replicas omit. Because this is a photo matched replica, the gill condition and body coloration visible in this frame are each matched by Greg Cassell from the customer's submitted catch photo.
Northern Pike Replica, Bean Spot Body Texture, First-Generation Mold Scale Detail
A close-up of the dorsal flank on a northern pike fish mount replica shows the yellow-gold bean-shaped spot patterning across the dark olive-green body, the individual scale texture captured from a first-generation mold, and the lateral line running the full body length. The cream-yellow bean spots of Esox lucius are one of the most recognizable coloration signatures in freshwater fishing, and Greg Cassell renders them in multi-stage automotive-grade airbrush paint built over a translucent pearl base coat. The scale-by-scale surface texture visible here is preserved from the original mold cast directly from a real fish, not a secondhand reproduction.
Northern Pike Replica, Mid-Body Flank and Ventral Fin Detail
The mid-body section of a northern pike fish mount replica shows the transition from the yellow-gold bean spot patterning on the dorsal flank to the cream-white ventral surface, with the pelvic fins and anal fin in a natural swimming position. The ventral-to-dorsal color gradient of Esox lucius runs from white at the belly through olive-gold at the flanks to dark olive-green on the dorsal surface, and Greg Cassell renders this gradient in multiple translucent automotive-grade airbrush layers. The pelvic fins, tinted amber-brown with dark mottling, are painted to match the specific fish submitted in the customer's photo matched commission.
Northern Pike Fish Mount Replica, Caudal Fin and Rear-Set Dorsal Fin, First-Generation Mold Structure
The tail section of a northern pike fish mount replica shows the forked caudal fin, the rear-set dorsal fin, and the anal fin with individual ray definition, all captured from a first-generation mold cast directly from a real fish specimen. The structural strength and ray definition visible in these fins come from the precision of the original mold, not a secondhand copy or generic blank. Greg Cassell finishes each fin in amber-brown with dark mottled bands using multi-stage automotive-grade airbrush pigments, matched to the specific fin coloration of the customer's photo matched commission.
Northern Pike Fish Mount Wall Mount, Right-Facing Full Body Profile
A right-facing full body profile of a northern pike fish mount wall mount by Greg Cassell shows the torpedo body shape, the yellow-gold bean spot patterning on the dark olive-green flanks, and the rear-set dorsal fin that is the species' most recognizable silhouette feature. Known to trophy anglers across the Great Lakes and Canadian Shield as the Water Wolf and jackfish, Esox lucius is one of the most aggressively hunted freshwater game fish in North America and one of the most requested photo matched fish mount replicas at Florida Fish Mounts. Northern pike fish mount replicas are available as double-sided full mounts and single-sided half mounts from 19 to 52 inches.
Northern Pike Full Mount Replica, Angled Open-Jaw Profile, Action Pose
An angled profile of a northern pike full mount replica by Greg Cassell shows the fully open jaw, the canine dentition, and the torpedo body from a slightly elevated perspective that captures the aggressive strike pose the species is known for. Northern pike earn the nickname gator from Great Lakes and Upper Midwest anglers for exactly this posture: the flattened duck-bill jaw fully open, the body torqued at the moment of ambush. This angle is common in northern pike catch photos, and because every Florida Fish Mounts replica is photo matched, Greg Cassell can reproduce the exact open-jaw angle and body arc of the customer's submitted catch photo.
47-Inch Northern Pike Single-Sided Half Mount Replica, Right-Facing Profile
A right-facing profile of a 47-inch northern pike single-sided half mount replica shows the full body from the duck-bill open jaw to the forked caudal fin, with the yellow-gold bean spot pattern and the rear-set dorsal fin in full lateral view. Northern pike single-sided half mount replicas at Florida Fish Mounts start at $10 per inch and are produced from the customer's submitted catch photo: no fish is required to commission a photo matched fiberglass wall mount. Greg Cassell matches the specific color phase, bean spot density, and fin condition visible in the catch photo in every commission.
Northern Pike Wall Mount Replica, Angled Full Body Profile, Open Jaw
An angled full body profile of a northern pike wall mount replica by Greg Cassell shows the torpedo body from a slightly elevated view that reveals the ventral surface, the open jaw with hand-sculpted canine teeth, and the dark olive-green dorsal with the rear-set dorsal fin. Every northern pike wall mount replica at Florida Fish Mounts is a photo matched commission: the specific bean spot density, body coloration, fin condition, and any individual markings are matched from the customer's submitted catch photo throughout the commission. No fish is required: catch-and-release anglers across the Great Lakes and Canadian Shield can commission a photo matched fiberglass wall mount from their release photo.
47-Inch Northern Pike Double-Sided Full Mount, Back View, Hand-Painted Glass Eye and Wall Bracket
The back of a 47-inch northern pike double-sided full mount replica shows the steel wall bracket, the secondary hand-painted glass eye installed on the reverse face, and the painted detail that covers the back surface. A hand-painted glass eye on the reverse side of the mount is standard at Florida Fish Mounts: buyers whose replica is visible from multiple angles get a fully finished piece on every surface, not a raw fiberglass back. Greg Cassell paints the dorsal surface detail visible here in the same multi-stage automotive-grade airbrush process used on the display face.
32-Inch Northern Pike Single-Sided Half Mount, Front and Back View, Adjustable Hanging Wire
Front and back views of a 32-inch northern pike single-sided half mount replica show the hand-painted display face with the bean spot coloration and the clean fiberglass back with adjustable hanging wire. The adjustable wire allows precise wall positioning without a fixed bracket. Unlike a northern pike skin mount, which develops grease bleed as the oily hide migrates through the paint over time, the fiberglass construction holds the display face finish indefinitely without color loss or deterioration. Northern pike single-sided half mount replicas from Florida Fish Mounts start at $10 per inch in sizes from 19 to 52 inches.
Simple and Transparent Pricing
$160 Minimum per mount. Contact us for pricing on mounts 150+ Inches, driftwood wall mounts, and pedestal mounts
Northern Pike Fish Mount Lengths Range from 19 inches to 52 inches
Half Mount
-
Up to 64": $10 / inch
-
65" to 90": $11 / inch
-
91" to 120": $12 / inch
-
121'' to 149'': $13 / inch
Full Mount
-
Up to 64": $17 / inch
-
65" to 90": $18 / inch
-
91" to 120": $19 / inch
-
121'' to 149'': $20 / inch
360° 3d Mount
-
Up to 64": $20 / inch
-
65" to 90": $21 / inch
-
91" to 120": $22 / inch
-
121'' to 149'': $23 / inch
Ready to Mount Your Cubera Snapper?
All mounts handpainted to order by Greg Cassell.
Minimum order $160.
Capture your trophy catch forever with a handcrafted, museum-quality mount by Greg Cassell. Join the anglers who have rated us five stars for craftsmanship and service.
5-Star Floridian Craftsmanship
bottom of page