top of page
Snakehead Fish Mount Replica
Northern and Bullseye Snakehead replica mounts, both hand-painted by Greg Cassell to match your catch photo. Frankenfish python pattern or vivid Bullseye orange spots. Order yours today.
31-Inch Northern Snakehead, Catch Photo Matched to Finished Double-Sided Full Mount Replica
A side-by-side comparison shows a northern snakehead angler hold at the moment of catch alongside the finished 31-inch double-sided full mount replica produced by Greg Cassell from that photo. The dark python-mottled Channa argus body pattern, the flattened snout profile, and the body proportions of the live fish are matched directly from the catch photo into the fiberglass replica below it. Because northern snakehead are a federally listed invasive species with mandatory removal laws in most states where they are established, a photo matched fiberglass replica is the natural trophy solution: the angler photographs the fish, removes it legally, and submits that photo to Florida Fish Mounts for the commission.
Northern Snakehead Replica, Head Close-Up, Hand-Sculpted Teeth and Python Pattern
A close-up of the head on a 31-inch northern snakehead double-sided full mount replica shows the flattened snout profile, the open jaw with hand-sculpted teeth, and the dark python-mottled Channa argus pattern across the face and operculum. Snakeheads have unusually large, sharp, layered teeth visible at the jaw, and Greg Cassell hand-sculpts the mouth and teeth on every replica to produce the dimensional predator dentition that paint alone cannot replicate. The yellow-olive jaw coloration, the operculum detail, and the glass eye are each painted using automotive-grade multi-stage airbrush pigments.
Northern Snakehead Replica, Mid-Body Python Pattern Scale Detail, First-Generation Mold
The mid-body section of a 31-inch northern snakehead fish mount replica shows the dark python-mottled Channa argus scale pattern at close range, with the individual scale relief preserved from a first-generation mold cast directly from a real fish specimen. The long dorsal fin running the body length and the pectoral fin base are visible in this frame, showing the anatomical positioning specific to this species. Greg Cassell renders the dark mottled pattern in multi-stage automotive-grade airbrush pigments over a translucent pearl base coat, producing the depth and tonal variation visible in the actual fish.
Northern Snakehead Replica, Caudal Fin and Tail Detail, First-Generation Mold Structure
A close-up of the caudal fin on a northern snakehead fish mount replica shows the rounded tail with individual fin ray definition, the body with the dark python-mottled Channa argus pattern, and the structural precision captured from a first-generation mold. The rounded caudal fin of Channa argus is distinct from the forked tails of most freshwater game fish, and the shape and ray definition visible here are reproduced from the original mold cast directly from a real fish specimen. Greg Cassell finishes the fin in muted olive-brown with darker ray bands using multi-stage automotive-grade airbrush pigments to match the specific fish in the customer's photo matched commission.
33-Inch Bullseye Snakehead Single-Sided Half Mount, Right-Facing Profile
A right-facing full body profile of a 33-inch bullseye snakehead single-sided half mount replica shows the vivid orange-amber body, the black-ringed ocellated spots of Channa marulius across the flank, the long dorsal fin running the body length, and the distinctive bullseye caudal spot at the tail. Florida Fish Mounts produces both Northern Snakehead (Channa argus) and Bullseye Snakehead (Channa marulius) fiberglass replica mounts from a shared premium blank; Greg Cassell hand-paints the species-accurate pattern by hand, the dark python pattern for the Northern or the orange-red ocellated spots for the Bullseye. Bullseye snakehead single-sided half mount replicas start at $10 per inch with a $160 minimum, photo matched from the angler's catch photo, and are the most popular trophy option for South Florida canal anglers in Broward, Palm Beach, and Dade counties.
Bullseye Snakehead Replica, Tail Close-Up, Ocellated Bullseye Caudal Spot and Body Scale Detail
A close-up of the tail section on a bullseye snakehead fish mount replica shows the rounded caudal fin with its distinctive black-ringed ocellated spot, the orange-red body with the dorsal fin running along the upper frame, and the individual scale pattern of Channa marulius at high resolution. The bullseye caudal spot, a black-ringed circle centered on the tail fin, is the primary visual identifier of the bullseye snakehead and what gives the species its common name; it is reproduced by Greg Cassell using multi-stage automotive-grade airbrush pigments to match the specific fish in the customer's photo matched commission. The individual scale relief visible in this frame is captured from a first-generation mold cast directly from a real bullseye snakehead specimen.
Northern Snakehead Double-Sided Full Mount, Right-Facing Profile, Frankenfish Python Pattern
A right-facing full body profile of a 30-inch northern snakehead double-sided full mount replica shows the elongated cylindrical body, the long dorsal fin running the body length, the open jaw, and the dark brown diamond-patterned Channa argus coloration that earns this species its angler nickname Frankenfish. Northern snakehead are established across the Mid-Atlantic river systems of Maryland, Virginia, and Pennsylvania, where they are a federally listed invasive species that must be legally removed on capture; Florida Fish Mounts ships northern snakehead fish mount replicas nationwide from Cocoa, Florida, serving Mid-Atlantic anglers who want a permanent photo matched fiberglass trophy from their catch. The double-sided full mount format starts at $17 per inch with a $160 minimum, in available sizes from 26 to 40 inches.
Frankenfish Jaw Close-Up, Hand-Sculpted Teeth and Predator Dentition, Greg Cassell
A close-up of the jaw on a 30-inch northern snakehead fish mount replica shows the full gape of the open mouth, both rows of hand-sculpted canine teeth, and the painted oral cavity at the detail level that defines Greg Cassell's fine-art sculpting standard. Snakeheads, known to Mid-Atlantic anglers as Frankenfish, have unusually large, sharp, backward-angled teeth across both upper and lower jaws; every Florida Fish Mounts snakehead replica has teeth hand-sculpted and installed individually, not cast as a flat tray. The glass eye, the mottled head pattern, and the jaw anatomy visible in this frame are all produced by Greg Cassell using automotive-grade multi-stage airbrush pigments.
Northern Snakehead Replica, Body Scale Texture Close-Up, Fiberglass vs Skin Mount
A close-up of the dorsal body section on a 30-inch northern snakehead fish mount replica shows the individual scale relief and the mottled Channa argus pattern at high magnification, with the long dorsal fin running along the top of the frame. A skin-mounted snakehead in Florida's climate is a documented failure: the organic material traps moisture and heat, producing odor, surface deterioration, and color loss over time that no preservation treatment prevents permanently. The archival fiberglass construction and automotive-grade UV-resistant urethane clear coat visible here hold the scale texture, mottled pattern, and color accuracy at this level indefinitely without organic breakdown.
Snakehead Fish Mount Replica, Caudal Fin Extreme Close-Up, Individual Fin Ray and Airbrush Detail
An extreme close-up of the caudal fin on a 30-inch northern snakehead fish mount replica shows the individual fin ray definition, the dark brown-amber banding across the rays, and the iridescent quality produced by Greg Cassell's multi-stage automotive-grade airbrush process over a translucent pearl base coat. Every fin ray is rendered individually with the color tones built up in separate translucent layers that produce the tonal depth visible here at maximum magnification. This level of caudal fin craftsmanship, reproduced from a first-generation mold, is standard at Florida Fish Mounts for every snakehead fish mount replica commission.
33-Inch Northern Snakehead Double-Sided Full Mount Replica, Right-Facing Profile
A right-facing full body profile of a 33-inch northern snakehead double-sided full mount replica painted by Greg Cassell shows the elongated Channa argus body, the long dorsal fin running most of the body length, and the dark mottled python-like pattern across the flank. The same premium fiberglass blank is used for both the Northern Snakehead and Bullseye Snakehead builds at Florida Fish Mounts; the species distinction is entirely in Greg's paintwork, with the dark mottled python pattern for the Northern and the vivid orange-red ocellated spots for the Bullseye. This is a photo matched commission: Greg Cassell matches the specific coloration, scale pattern, and any individual markings from the angler's submitted catch photo throughout the commission.
Snakehead Fish Mount, 31-Inch Full Mount and 33-Inch Half Mount Back View, Adjustable Hanging Wire
Front and back views of a 31-inch northern snakehead double-sided full mount and a 33-inch snakehead single-sided half mount show the wall bracket and the clean fiberglass back with adjustable hanging wire. The double-sided full mount uses a steel wall bracket mounted flush to the wall; the single-sided half mount uses adjustable rubber-coated wire that allows precise wall positioning without a fixed bracket. Both snakehead fish mount replica formats ship fully finished and ready to hang from Florida Fish Mounts in Cocoa, Florida, to snakehead anglers across the Mid-Atlantic and South Florida.
Simple and Transparent Pricing
$160 Minimum per mount. Contact us for pricing on mounts 150+ Inches, driftwood wall mounts, and pedestal mounts
Snakehead Fish Mount Lengths are 30, 31, and 33 inches.
Half Mount
-
Up to 64": $10 / inch
-
65" to 90": $11 / inch
-
91" to 120": $12 / inch
-
121'' to 149'': $13 / inch
Full Mount
-
Up to 64": $17 / inch
-
65" to 90": $18 / inch
-
91" to 120": $19 / inch
-
121'' to 149'': $20 / inch
360° 3d Mount
-
Up to 64": $20 / inch
-
65" to 90": $21 / inch
-
91" to 120": $22 / inch
-
121'' to 149'': $23 / inch
Ready to Mount Your Snakehead?
All mounts handpainted to order by Greg Cassell.
Minimum order $160.
Capture your trophy catch forever with a handcrafted, museum-quality mount by Greg Cassell. Join the anglers who have rated us five stars for craftsmanship and service.
5-Star Floridian Craftsmanship
bottom of page