Wahoo Fish Mount Replica

The Wahoo, nicknamed Ono, is one of the ocean's fastest saltwater game fish, known for blistering high-speed runs during the fight. See the full gallery below and order yours today.

Upload Your Catch!

Start Your Mount!

Fish Mount Replicas hand Painted by artist Greg Cassell at FloridaFishMounts.com

37-inch wahoo fiberglass full mount replica showing hand-painted glass eye, by artist Greg Cassell at Florida Fish Mounts

Catch Photo Compared to Finished Replica | 62" Wahoo Full Mount Replica

A side-by-side comparison shows a 62-inch wahoo at the boat next to the completed fiberglass full mount replica painted by artist Greg Cassell. The vertical cobalt striping, elongated jaw, and torpedo-shaped body are painted from the angler's own catch photo rather than from the fish itself. This is the core of the catch and release process at Florida Fish Mounts: the wahoo returns to the water and the fiberglass replica goes on the wall.

Open Mouth Profile Matched to Catch Photo | 62" Wahoo Full Mount Replica

At a three-quarter angle, this 62-inch wahoo full mount replica shows the elongated, beak-like jaw and rows of small, sharp teeth in full detail. The teeth and mouth are hand-sculpted before any paint is applied, then matched to the angler's catch photo for pose and coloration. The vertical cobalt barring along the flank and the sail-like dorsal fin are airbrushed in multiple stages for accuracy. This full mount design is built to hang flat against the wall and read clearly from across a room.

Dorsal Fin and Vertical Striping Detail | 62" Wahoo Full Mount Replica

Close inspection of this 62-inch Acanthocybium solandri full mount replica reveals the saw-toothed dorsal spines, a defining feature of the species, hand-painted deep blue by artist Greg Cassell. The vertical cobalt barring visible here fades quickly on a real wahoo once out of the water, but holds indefinitely on a fiberglass replica finished in UV-resistant clear coat. Fin ray detail and scale texture are worked in by hand before the final coat is applied.

Ono Wall Mount, Full Body Profile | 37" Wahoo Full Mount Replica

Hawaiian anglers and the sushi trade both know this fish as Ono, and this 37-inch wahoo full mount replica is shown in full lateral profile to work as a compact wahoo wall mount in a den, office, or boat cabin. Half mount pricing for a wahoo of this length starts at $10 per inch with a $160 minimum. The piece is cast from a first-generation mold for full anatomical detail, and every fin ray, tooth, and scale is hand-painted using the angler's own catch photo as reference.

Back View Showing Steel Bracket and Teeth | Wahoo Full Mount Replica

Flip this wahoo full mount replica over and the steel wall bracket and hand-sculpted mouth are visible from the reverse angle, a level of finish carried through every surface of the piece, not just the display face. Fiberglass construction holds this detail indefinitely, with no warping, shrinkage, or odor the way a traditional skin mount can develop over time. Florida Fish Mounts offers this wahoo wall mount as a half mount, full mount, or 360 degree mount depending on how much of the fish an angler wants on display.

Tail Detail Captures Motion and Speed | 37" Wahoo Full Mount Replica

Fifty to sixty miles per hour is the commonly cited top speed for a wahoo, among the fastest gamefish in the ocean, and this curved, tail-forward pose on a 37-inch full mount replica is built to suggest that speed on the wall. Artist Greg Cassell hand-airbrushes the lunate tail, dark fin tips, and individual fin rays in a multi-stage automotive-grade finish. The pose is sculpted before paint is applied, so the motion reads correctly from every angle.

Full Mount Photo Matched to Angler's Catch | 60" Wahoo Full Mount Replica

Every wahoo replica at Florida Fish Mounts starts with the angler's own catch photo, and this 60-inch full mount is painted to match that photo's coloration and proportions. No fish is required for the commission, and the original catch is released. Standard turnaround runs 9 to 12 weeks, and the Current Production Time link in the site footer shows the most accurate estimate at the time of order.

Swimming Pose Shows Full Body Curve | 62" Wahoo Full Mount Replica

Members of the Scombridae family, which also includes mackerel and tuna, wahoo carry notably oily flesh that is prone to grease bleed and rapid color fade in a traditional skin mount. This 62-inch fiberglass full mount replica avoids that failure entirely, since no actual fish tissue is used in the finished piece. Full mount pricing for a wahoo of this length starts at $17 per inch with a $160 minimum, backed by an automotive-grade finish and UV-resistant clear coat for long-term color stability.

Simple and Transparent Pricing

$160 Minimum per mount. Contact us for pricing on mounts 150+ Inches, driftwood wall mounts, and pedestal mounts

Wahoo Fish Mount Lengths Range from 17 inches to 79 inches

Fish Mount Price Calculator

Half Mount

Up to 64": $10 / inch
65" to 90": $11 / inch
91" to 120": $12 / inch
121'' to 149'': $13 / inch

Full Mount

Up to 64": $17 / inch
65" to 90": $18 / inch
91" to 120": $19 / inch
121'' to 149'': $20 / inch

360° 3d Mount

Up to 64": $20 / inch
65" to 90": $21 / inch
91" to 120": $22 / inch
121'' to 149'': $23 / inch

Ready to Mount Your Wahoo?

All mounts handpainted to order by Greg Cassell.
Minimum order $160.